fdisk

fdisk Commands to Manage Linux Disk Partitions

fdisk stands (for “fixed disk or format disk“) is an most commonly used command-line based disk manipulation utility for a Linux/Unix systems. With the help of fdisk command you can view, create, resize, delete, change, copy and move partitions on a hard drive using its own user friendly text based menu driven interface. This tool is very useful in terms of creating space for new partitions, organising space for new drives, re-organising an old drives and copying or moving data to new disks. It allows you to create a maximum of four new primary partition and number of logical (extended) partitions, based on size of the hard disk you have in your system. 1. View all Disk Partitions in Linux The following basic command list all existing disk partition on your system. The ‘-l‘ argument stand for (listing all partitions) is used with fdisk command to view all available partitions on Linux. The partitions are displayed by their device’s names. For example: /dev/sda, /dev/sdb or /dev/sdc. [root@tecmint.com ~]# fdisk -l   Disk /dev/sda: 637.8 GB, 637802643456 bytes 255 heads, 63 sectors/track, 77541 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes      Device Boot      Start         End      Blocks   Id  System /dev/sda1   *           1          13      104391   83  Linux /dev/sda2              14        2624    20972857+  83  Linux /dev/sda3            2625        4582    15727635   83  Linux /dev/sda4            4583       77541   586043167+   5  Extended /dev/sda5            4583        5887    10482381   83  Linux /dev/sda6            5888        7192    10482381   83  Linux /dev/sda7            7193        7845     5245191   83  Linux /dev/sda8            7846        8367     4192933+  82  Linux swap / Solaris /dev/sda9            8368       77541   555640123+  8e  Linux LVM 2. View Specific Disk Partition in Linux To view all partitions of specific hard disk use the option ‘-l‘ with device name. For example, the following command will display all disk partitions of device /dev/sda. If you’ve different device names, simple write device name as /dev/sdb or /dev/sdc. [root@tecmint.com ~]# fdisk -l /dev/sda   Disk /dev/sda: 637.8 GB, 637802643456 bytes 255 heads, 63 sectors/track, 77541 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes      Device Boot      Start         End      Blocks   Id  System /dev/sda1   *           1          13      104391   83  Linux /dev/sda2              14        2624    20972857+  83  Linux /dev/sda3            2625        4582    15727635   83  Linux /dev/sda4            4583       77541   586043167+   5  Extended /dev/sda5            4583        5887    10482381   83  Linux /dev/sda6            5888        7192    10482381   83  Linux /dev/sda7            7193        7845     5245191   83  Linux /dev/sda8            7846        8367     4192933+  82  Linux swap / Solaris /dev/sda9            8368       77541   555640123+  8e  Linux LVM 3. Check all Available fdisk Commands If you would like to view all commands which are available for fdisk. Simply use the following command by mentioning the hard disk name such as /dev/sda as shown below. The following command will give you output similar to below. [root@tecmint ~]# fdisk /dev/sda   WARNING: DOS-compatible mode is deprecated. It's strongly recommended to          switch off the mode (command 'c') and change display units to          sectors (command 'u').   Command (m for help): Type ‘m‘ to see the list of all available commands of fdisk which can be operated on /dev/sda hard disk. After, I enter ‘m‘ on the screen, you will see the all available options for fdisk that you can be used on the /dev/sda device. [root@tecmint ~]# fdisk /dev/sda   WARNING: DOS-compatible mode is deprecated. It's strongly recommended to          switch off the mode (command 'c') and change display units to          sectors (command 'u').   Command (m for help): m Command action    a   toggle a bootable flag    b   edit bsd disklabel    c   toggle the dos compatibility flag    d   delete a partition    l   list known partition types    m   print this menu    n   add a new partition    o   create a new empty DOS partition table    p   print the partition table    q   quit without saving changes    s   create a new empty Sun disklabel    t   change a partition's system id    u   change display/entry units    v   verify the partition table    w   write table to disk and exit    x   extra functionality (experts only)   Command (m for help): 4. Print all Partition Table in Linux To print all partition table of hard disk, you must be on command mode of specific hard disk say /dev/sda. [root@tecmint ~]# fdisk /dev/sda From the command mode, enter ‘p‘ instead of ‘m‘ as we did earlier. As I enter ‘p‘, it will print the specific /dev/sda partition table. Command (m for help): p   Disk /dev/sda: 637.8 GB, 637802643456 bytes 255 heads, 63 sectors/track, 77541 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes      Device Boot      Start         End      Blocks   Id  System /dev/sda1   *           1          13      104391   83  Linux /dev/sda2              14        2624    20972857+  83  Linux /dev/sda3            2625        4582    15727635   83  Linux /dev/sda4            4583       77541   586043167+   5  Extended /dev/sda5            4583        5887    10482381   83  Linux /dev/sda6            5888        7192    10482381   83  Linux /dev/sda7            7193        7845     5245191   83  Linux /dev/sda8            7846        8367     4192933+  82  Linux swap / Solaris /dev/sda9            8368       77541   555640123+  8e  Linux LVM   Command (m for help): 5. How to Delete a Partition in Linux If you would like to delete a specific partition (i.e /dev/sda9) from the specific hard disk such as /dev/sda. You must be in fdisk command mode to do this. [root@tecmint ~]# fdisk /dev/sda Next, enter ‘d‘ to delete any given partition name from the system. As I enter ‘d‘, it will prompt me to enter partition number that I want to delete from /dev/sda hard disk. Suppose I enter number ‘4‘ here, then it will delete partition number ‘4‘ (i.e. /dev/sda4) disk and shows free space in partition table. Enter ‘w‘ to write table to disk and exit after making new alterations to partition table. The new changes would only take place after next reboot of system. This can be easily understood from the below output. [root@tecmint ~]# fdisk /dev/sda   WARNING: DOS-compatible mode is deprecated. It's strongly recommended to          switch off the mode (command 'c') and change display units to          sectors (command 'u').   Command (m for help): d Partition number (1-4): 4   Command (m for help): w The partition table has been altered!   Calling ioctl() to re-read partition table.   WARNING: Re-reading the partition table failed with error 16: Device or resource busy. The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) Syncing disks. You have new mail in /var/spool/mail/root Warning : Be careful, while performing this step, because using option ‘d‘ will completely delete partition from system and may lost all data in partition. 6. How to Create a New Partition in Linux If you’ve free space left on one of your device say /dev/sda and would like to create a new partition under it. Then you must be in fdisk command mode of /dev/sda. Type the following command to enter into command mode of specific hard disk. [root@tecmint ~]# fdisk /dev/sda After entering in command mode, now press “n” command to create a new partition under /dev/sda with specific size. This can be demonstrated with the help of following given output. [root@tecmint ~]# fdisk  /dev/sda   WARNING: DOS-compatible mode is deprecated. It's strongly recommended to          switch off the mode (command 'c') and change display units to          sectors (command 'u').   Command (m for help): n Command action    e   extended    p   primary partition (1-4) e While creating a new partition, it will ask you two options ‘extended‘ or ‘primary‘ partition creation. Press ‘e‘ for extended partition and ‘p‘ for primary partition. Then it will ask you to enter following two inputs. First cylinder number of the partition to be create. 2.       Last cylinder number of the partition to be created (Last cylinder, +cylinders or +size). You can enter the size of cylinder by adding “+5000M” in last cylinder. Here, ‘+‘ means addition and 5000M means size of new partition (i.e 5000MB). Please keep in mind that after creating a new partition, you should run ‘w‘ command to alter and save new changes to partition table and finally reboot your system to verify newly created partition. Command (m for help): w The partition table has been altered!   Calling ioctl() to re-read partition table.   WARNING: Re-reading the partition table failed with error 16: Device or resource busy. The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) Syncing disks. 7. How to Format a Partition in Linux After the new partition is created, don’t skip to format the newly created partition using ‘mkfs‘ command. Type the following command in the terminal to format a partition. Here /dev/sda4 is my newly created partition. [root@tecmint ~]# mkfs.ext4 /dev/sda4 8. How to Check Size of a Partition in Linux After formatting new partition, check the size of that partition using flag ‘s‘ (displays size in blocks) with fdisk command. This way you can check size of any specific device. [root@tecmint ~]# fdisk -s /dev/sda2 5194304 9. How to Fix Partition Table Order If you’ve deleted a logical partition and again recreated it, you might notice ‘partition out of order‘ problem or error message like ‘Partition table entries are not in disk order‘. For example, when three logical partitions such as (sda4, sda5 and sda6) are deleted, and new partition created, you might expect the new partition name would be sda4. But, the system would create it as sda5. This happens because of, after the partition are deleted, sda7 partition had been moved as sda4 and free space shift to the end. To fix such partition order problems, and assign sda4 to the newly created partition, issue the ‘x‘ to enter an extra functionality section and then enter ‘f‘ expert command to fix the order of partition table as shown below. [root@tecmint ~]# fdisk  /dev/sda   WARNING: DOS-compatible mode is deprecated. It's strongly recommended to          switch off the mode (command 'c') and change display units to          sectors (command 'u').   Command (m for help): x   Expert command (m for help): f Done.   Expert command (m for help): w The partition table has been altered!   Calling ioctl() to re-read partition table.   WARNING: Re-reading the partition table failed with error 16: Device or resource busy. The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) Syncing disks. After, running ‘f‘ command, don’t forget to run ‘w‘ command to save and exit from fdisk command mode. Once it fixed partition table order, you will no longer get error messages. 10. How to Disable Boot Flag (*) of a Partition By default, fdisk command shows the boot flag (i.e. ‘*‘) symbol on each partition. If you want to enable or disable boot flag on a specific partition, do the following steps. [root@tecmint ~]# fdisk  /dev/sda Press ‘p‘ command to view the current partition table, you see there is a boot flag (asterisk (*) symbol in orange color) on /dev/sda1 disk as shown below. [root@tecmint ~]# fdisk /dev/sda   WARNING: DOS-compatible mode is deprecated. It's strongly recommended to          switch off the mode (command 'c') and change display units to          sectors (command 'u').   Command (m for help): p   Disk /dev/sda: 637.8 GB, 637802643456 bytes 255 heads, 63 sectors/track, 77541 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes      Device Boot      Start         End      Blocks   Id  System /dev/sda1   *           1          13      104391   83  Linux /dev/sda2              14        2624    20972857+  83  Linux /dev/sda3            2625        4582    15727635   83  Linux /dev/sda4            4583       77541   586043167+   5  Extended /dev/sda5            4583        5887    10482381   83  Linux /dev/sda6            5888        7192    10482381   83  Linux /dev/sda7            7193        7845     5245191   83  Linux /dev/sda8            7846        8367     4192933+  82  Linux swap / Solaris /dev/sda9            8368       77541   555640123+  8e  Linux LVM Next enter command ‘a‘ to disable boot flag, then enter partition number ‘1‘ as (i.e. /dev/sda1) in my case. This will disable boot flag on the partition /dev/sda1. This will remove the asterisk (*) flag. Command (m for help): a Partition number (1-9): 1   Command (m for help): p   Disk /dev/sda: 637.8 GB, 637802643456 bytes 255 heads, 63 sectors/track, 77541 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes      Device Boot      Start         End      Blocks   Id  System /dev/sda1               1          13      104391   83  Linux /dev/sda2              14        2624    20972857+  83  Linux /dev/sda3            2625        4582    15727635   83  Linux /dev/sda4            4583       77541   586043167+   5  Extended /dev/sda5            4583        5887    10482381   83  Linux /dev/sda6            5888        7192    10482381   83  Linux /dev/sda7            7193        7845     5245191   83  Linux /dev/sda8            7846        8367     4192933+  82  Linux swap / Solaris /dev/sda9            8368       77541   555640123+  8e  Linux LVM   Command (m for help):